ZOELLER
Float Switches

Download float switches in pdf

DEAN BENNETT SUPPLY
Independent Zoeller Pump Distributor
Toll Free   800 - 621 - 4291


  PUMP DOWN to EMPTY TANK   FLOAT SWITCHES

The Pump Down to Empty Tank control is used with sump and sewage pumps. We stock these variable level float switches in the piggy-back plug-in design. The float switch plugs into the outlet and then the pump plugs into the piggy-back switch. These plugs are wired for either 115 volt or 230 volt use and all come with a 15' cord.
These variable level float switches are mechanically activated and DO NOT CONTAIN MERCURY to avoid any environmentally sensitive concerns.
The single ball switch has only one float that controls both the on and off function of the pumping range.
The double ball float switch has two floats. One that turns the pump on and one that turns the pump off, which allows for a much wider range of on and off levels.
Single ball switches can be direct wired by cutting off the plug.
Double ball float switches MUST be used with the plug. DO NOT CUT THE PLUG OFF THE DOUBLE BALL FLOAT SWITCH.
The States of CT, RI, ME, IL, VT, MN, NY, MA, & CA can not use mercury floats - must buy special floats

 Shows how a float switch is used to turn a pump on and off.
Piggy back float switches plug into the wall outlet and then the pump plugs into the back of the float switch plug.


#10-0034
No Mercury


$   32.25


115 Volt Junior Single Ball Float Switch Control has a 15' cord with piggy-back plug for use with up to 13 amps maximum.


#10-0032
No Mercury


$   51.00


115 Volt Super Single Ball Control for 15 amps maximum has 15' cord with piggy-back plug. Must be used with #140, #163 and #270 Zoeller Pumps.

#10-0706
No Mercury
$   37.75
230 Volt Single Ball Float Switch Control for 13 amp maximum with 20' cord and piggy-back plug.
For use with #293 Zoeller Pump.


#10-0033
No Mercury


$   55.50


230 Volt Super Single Ball Float Switch Control has a 15' cord with piggy-back plug for up to 15 amps maximum.

#1016864
No Mercury
$ 109.95
115 Volt Mechanical Double Ball Float Switch for pump down. Has 15' piggy back plug and is rated 13 amps maximum.


#10-0229
Mercury Switch


$   93.00


115 Volt Super Double Ball Float Switch Control has 15' cord with piggy-back plug for up to 15 amps maximum. Mercury activated switch.

#1017657
No Mercury
$ 108.00
230 Volt Mechanical Double Ball Float Switch for pump down. Has 15' piggy back plug and is rated 13 amps maximum.


#10-0230
Mercury Switch


$   98.25


230 Volt Super Double Ball Float Switch Control has 15' cord with piggy-back plug for up to 15 amps maximum. Mercury activated switch.
This float switch assembly has a plug on the end to plug into the wall outlet.

Float switch without a plug can be used to hard wire a pump system.

PUMP UP to FILL TANK   FLOAT SWITCHES


The Pump Up to Fill Tank controls serve just the opposite function as described
above and are used to turn a pump off when cistern or tank is full. We stock these in open end ( without plug ) for direct wiring purposes. Since there is no plug, they can be used for either 115 volt or 230 volt use. All come with 15' cord. These variable level float switches are mechanically activated and DO NOT CONTAIN MERCURY to avoid any environmentally sensitive concerns.


#1002725
  $ 44.50
No Mercury
Junior Single Ball Float Switch Control, without plug for use with up to 13 amps maximum. Can be used for either 115 volt or 230 volt direct wiring.

#1003253
  $ 61.25
No Mercury
Super single Ball Float Switch Control, without plug for use with up to 15 amps maximum. Can be used for either 115 volt or 230 volt direct wiring.

JUNIOR SWITCHES are for pumps up to 1/2 hp at 115 volts or 1 hp at 230 volts drawing a maximum of 13 amps.

SUPER SWITCHES are for pumps up to 3/4 hp at 115 volts or 2 hp at 230 volts drawing a maximum of 15 amps.


SENSOR FLOAT CONTROLS

Download Sensor Float Controls in pdf
#10-0744
  $ 25.00
No Mercury		 Non Mercury Sensor Floats for panels, normally open control is used with control panels and is 20' long. A float switch is tethered onto the discharge pipe to control its on and off points.
#01-1832
  $ 25.00
No Mercury		 Identical to the # 10-0744 above

#10-0225
  $ 28.00
Mercury
Activated
Sensor Float with internal weight is a normally open control used with alarms and alternator packages. It has a 15' open end cord and can be used in either 115 volt or 230 volt installations.
#10-0022
  $ 38.50
Mercury
Activated		 Same as above unit except with 35' cord.

#1002152
  $ 40.75
Mercury
Activated
#15-SWE-NO normally open sensor is the same as above except it has an external adjustable weight attached to the cable. It is used in any application where the float is suspended from
above, rather than being attached to the pipe.

#1006047
  $ 30.50
No Mercury
Sensor float switch with 15' open end cord that is normally closed. Rated 5 amps at either 115 volt or 230 volt. Float is not weighted, but comes with pipe tie clamp to control alarm
activation level.

FREIGHT IS PREPAID IF ORDER IS OVER  $  1,000.00


Affordable Zoeller sump dewatering pumps for every waste water elimination need.

Zoeller sewage waste pumps are known for their quality and performance.

Zoeller pumps best buy models are the M267 automatic sewage pump and the M53 automatic sump dewatering pump.

Zoeller 820 grinder is the residentail grinder pump of choice for sewage that needs chewed up and pumped a long way away.

Zoeller Qwik Jon is a packaged system for adding a bathroom to a basement without tearing up the concrete floor.

The 840 Commercial Grinder pump for sewage will reverse operation each time it starts to prevent blockages that can burn out a motor.

The battery powered basement sentry backup sump dewatering pump is ideal for when you experience a power outage.

Homeguard offers you a reliable backup sump dewatering pump powered by water, when the power is off.

Zoeller package systems include a sewage basin with lid, a Zoeller automatic sewage pump and a sewage check valve.

The Outdoor burial sewage pump package consist of the M264 sewage pump, an 18" x 30" burial type basin with a solid lid and underground discharge.

Zoeller sewage collection basins are available in many sizes to meet most every sewage pumping requirement.

Zoeller crawl space dewatering pump package is a slotted poly basin for collecting ground water, an M53 automatic sump dewatering pump and a flexible ribbed hose for discharge of the collected water.

Zoeller float switches are used to control turning on and turning off a sump or sewage pump based on water level in a basin.

Zoeller check valves prevent sewage from running back into the sewage basin after the sewage pump turns off.

Zoeller pump control panels alternate power to 2 pumps turning them on and off, while offering a high water alarrm and capability of running both pumps if one does not keep up with demand.

Zoeller pumps home page where you can select the Zoeller pump you need.

Call us at 800-621-4291 to select the Zoeller sump or sewage pump that meets your needs.

Prices effective October 1, 2009

Download our catalog in pdf format