ZOELLER
Sewage Basins

DEAN BENNETT SUPPLY
Independent Zoeller Pump Distributor
Toll Free   800 - 621 - 4291


POLYETHYLENE SEWAGE BASINS

Download Sewage Basin Tanks Catalog Page 16
These high density polyethylene sewage basins are IAPMO approved and are ideal for either residential or commercial applications. Polyethylene basins offer one-piece seam-free construction. Durable steel covers with anti-corrosion coating are included. Poly tanks are for basement floor installation only, not for outdoor use.
Lids are available with 2" or 3" vent as well as 2" or 3" discharge.
Duplex covers include two pump plates and an inspection plate. Gasket,
necessary sealing hardware and flanges and a 4" cast iron entrance hub are standard.
Center line for the hub is 9" down from the top of the basin.
These sewage basins are water tight and gas tight when properly installed.
 

 


Zoeller sewage pump basin.


SIMPLEX SEWAGE TANK SELECTION
#31-0091 $   89.00 18" x  30"  Simplex Poly Tank
with  2" discharge and  2" vent
#31-0082 $   97.00 18" x  30"  Simplex Poly Tank
with  3" discharge and  3" vent
#31-0159 $ 124.00 18" x  30" Special Simplex Tank with 2" Discharge and 2" Vent
is IAPMO  10' Water Stack Test Rated. CA & FL Approved.
#31-0039 $ 246.00* 24" x  30"  Extra Large Simplex Sewage
Poly Tank with  2" discharge and vent
#31-0040 $ 254.00* 24" x  30"  Extra Large Simplex Sewage
Poly Tank with  3" discharge and vent
#31-1102
 $ 302.00*
 		 24" x  36"  Extra Depth Deluxe Simplex Sewage
Poly Tank with  Fiberglass Lid with 2" vent and discharge,
and having a 4" pipe seal for the inlet.
#31-0251 $   69.00 18" x  22"  Poly Basin w/ Radon Sealed Steel Lid
for sump pumps only. Inlet has pipe seal for 4" pipe,
no hub. Lid includes pipe seal for 3" vent, 1-1/2"
discharge and cord seal.

DUPLEX SEWAGE TANK SELECTION

 Zoeller 2 pump installation basin.
#31-0043 $ 490.00*


30" x  36"  Duplex Poly Tank
with  2" discharge and  2" vent
#31-0044 $ 520.00*


30" x  36"  Duplex Poly Tank
with  3" discharge and  2" vent
#31-0047 $ 623.00*


36" x  36"  Duplex Poly Tank
with  2" discharge and  2" vent
#31-0048 $ 653.00*


36" x  36"  Duplex Poly Tank
with  3" discharge and  3" vent


24" x 48" FIBERGLASS SIMPLEX BASIN
Simplex Tank for Outdoor Burial Installation

#31-0866      $ 500.00*

This 24" x 48" deep fiberglass simplex basin is designed for outdoor installation for a single sewage pump or for a grinder pump. The basin has an anti-floatation ring to prevent the tank from rising due to ground water. A solid 3/8" thick fiberglass lid covers the tank, while you get 5 grommet seals to install your incoming and outgoing pipes, one 1-1/4", one 1-1/2", two 2" and one 4".


24" x 60" FIBERGLASS SIMPLEX BASIN
Simplex Tank for Outdoor Burial Installation.

Outdoor Burial Basin Catalog Page 16b

This 24" x 60" deep fiberglass simplex basin is designed for outdoor installation for a single sewage pump or for a grinder pump. The basin has an anti-floatation ring to prevent the tank from rising due to ground water. A solid 3/8" thick fiberglass lid covers the tank, while you get 5 grommet seals to install your incoming and outgoing pipes, one 1-1/4", one 1-1/2", two 2", and one 4".

#31-0946    $ 560.00*

 


36" X 60" FIBERGLASS DUPLEX BASIN
NOW IN DENVER STOCK

#31-1451     $ 1060.00*

This 36" x 60" fiberglass outdoor burial basin is designed for a duplex 2 pump installation. The basins comes complete with a set of 5 adapta-flex seals for installing your lines in and out of the basin. The seals are one 1-1/4", one 1-1/2", two 2", and one 4" sizes.

This basin can be used with 2 sewage grinder pumps, or 2 standard Zoeller sewage pumps for a duplex 2 pump sewage system.
$ 245.00          #310994          24" x 12" Extension for use with 24" fiberglass outdoor burial basins. Zoeller does not recommend using more than 1 extension on their fiberglass tanks.  
$ 299.00          #310813          36" x 12" Extension for use with 36" fiberglass outdoor burial basins. Zoeller does not recommend using more than 1 extension on their fiberglass tanks.  

 


RAIL SYSTEMS FOR INSTALLATION IN THE ABOVE OUTDOOR BURIAL BASINS

$ 275.00
 #SPDS5     Build your own burial sump or sewage package. This rail system has connection for an 1-1/4" from the pump to the discharge. Install the sewage pump disconnect rail system into any of the outdoor burial basins above, to accommodate installation of your sewage pump, making it like the packaged system we offer above. The rails are 3/4" pipe size, for the ability to fit any depth tank.
Build your own sewage pump packaged system with this rail system for connecting from the sewage pump to the sewage discharge line in your buried sewage basin.
$ 300.00  #SPDS6    This 1-1/2" sewage pump disconnect rail system is just like the 2" unit below. The rail system uses 3/4" pipe size rails, and can be sized to fit any outdoor burial sewage tank.

$ 355.00
#SPDS8     This 2" sewage pump disconnection rail system is just like the unit above, except that it is for 2" discharge pumps to a 2" discharge line. The rail system still uses the 3/4" pipe size rails, and can be sized to fit any burial outdoor sewage tank.
The above sewage pump disconnect rail systems can also be used in the indoor sewage basins that install into your basement floor. This makes it easier to remove the pump from the basin, and even easier to align the pump when re-installing it into the basin.

* Due to high truck freight cost on basins and sewage systems larger than 18x30, it is necessary to charge $ 125.00 surcharge on these systems and basins.

FREIGHT IS PREPAID IF ORDER IS OVER  $  1,000.00