Repair Parts for Model 702 & 802 Aermotor & Fiasa
The following Aermotor Windmill parts are used with both model 702 and model 802 windmill wheels. Some of the parts can be used with model 602. You can identify your model by checking the motor casting on the side away from the hub. There will be a letter to indicate the size and 3 numbers to indicate the model number, ie 702 or 802.
After 9/14/2006 add 10% to windmills and windmill repair parts.
| Part # | Description |
X = 6' | A= 8' | B=10' | D=12' | E=14' | F=16' |
| 34 | Outer Wheel Band |
* $ 26.50 | * $ 35.75 | * $ 73.75 | $ 108.00 | $ 213.00 | $ 279.00 |
| 35 | Inner Wheel Band |
* 11.50 | * 22.00 | * 33.50 | 57.50 | 78.25 | 119.00 |
| 100 | Sail w/#17 Tie |
* 30.00 | * 38.00 | * 68.00 | * 88.50 | 125.50 | 171.00 |
| 101 | Sail Rib |
* 6.00 | * 8.00 | * 11.00 | * 15.00 | 19.00 | 28.00 |
| 690 | Brake Band | * 29.00 | * 36.00 | * 49.00 | * 74.00 | 123.00 | 159.00 |
| 703 | Hub & Shaft Assy | * 325.00 | * 338.00 | * 425.00 | 868.00 | 1282.00 | 1722.00 |
| 729 | Pin for Hub & Shaft | * 2.00 | * 3.00 | * 4.00 | * 5.00 | 6.00 | 7.00 |
| ** 730 | Sleeve Bearing for Hub & Shaft | * 36.00 | * 52.75 | * 91.00 | |||
| ** 830 | * 110.00 | * 123.00 | * 198.00 | * 240.00 | 346.00 | 794.00 | |
| 736 | Wheel Arm | * 28.75 | * 37.00 | * 43.75 | * 60.00 | 112.00 | 139.00 |
* Indicated normal Denver stock repair parts. |
|||||||
** The 730 is the old style bearing with babbitt material, while the 830 is the current new style bearing made with garlock, a synthetic fiber believed to last longer. Either one will work in any 702 or 802 Aermotor windmill. |
|||||||
Discount Structure for Windmill Parts Only |
|||||||
Parts Orders Less Than $ 200. |
NET | ||||||
Parts Orders $ 200. thru $ 500. |
15% Discount | ||||||
| Parts Orders Over $ 500. | 20% Discount | ||||||
Prices effective April 30, 2008