Dean Bennett Supply Co. has been an authorized Aermotor windmill distributor for 48 years. We stock a full range of genuine made in the U.S.A. Aermotor windmill repair parts. Our windmill parts are for Aermotor 702 and 802 models. Our parts also fit the American West windmills. We stock both 702 babbitt style and 802 garlock style bearings. You will need to know if you have the 702 or 802 model Aermotor windmill to order the correct parts. You will need the model number and size on the mainframe of the windmill. You will find a letter like X or A or B then three numbers like 702 or 802. The letter refers to the size of the windmill and the numbers states the model number. You can also give us the letter and part numbers on both the pitman arms and the large gear and we can tell you the size and model. Since 1965 we have been giving great service from knowledgeable people, please give us a call at 800-621-4291.

Aermotor Windmills Parts Explosion View for repair parts for a windmill

AERMOTOR
Windmill
Repair Parts
DEAN BENNETT SUPPLY CO.
Toll Free : 800-621-4291
Parts Orders Less than $ 200.00 Net Cost
Parts Orders $ 200.00 thru $ 500.00 -15% Discount
Parts Orders Over $ 500.00 -20% Discount
Prices effective 2/13/2013


FREIGHT PREPAID ON OVER $ 1,000.00 ORDERS

Aermotor Windmill Repair Parts Part #     (X) 6 ft windmill (A)  8 ft windmill (B)  10 ft windmill

Vane Spring

28

$   22.05

$   27.30

$   50.40
Outer Band for Wheel 34 30.20 41.25 84.55
Inner Band for Wheel 35 13.40 25.50 38.85
Narrow U-Bolt for Vane 44 11.55 13.65 13.65
Wide U-Bolt for Vane 46 11.55 13.65 13.65
Connector - Pump Pole to Well Rod 62 25.20 25.20 32.55
Set of Pump Pole Splice Straps 82 25.20 25.20 31.50
Sail  w/sail tie attached 100 35.20 43.60 78.50
Sail Rib 101 7.35 9.45 12.60
Domestic Pull Rod for 702 or 802 171 65.90 69.30 94.80
Furl Handle Assembly 243-1/2 47.25 47.25 67.20
Oil Ring 507 9.45 10.50 11.55
Pitman Guide w/#588 & 2 #508R 508 47.25 58.80 73.50
Pitman Guide Rivet 508R 1.05 3.15 4.20
Pivot Bolt for Tail Bone 510 23.10 26.25 42.00
Spring for Spout Washer 517 3.15 3.15 5.25
Oil Collector 520 12.60 13.65 16.80
Split Washer 521 10.50 11.55 13.65
Shaft for Guide Wheel w/ Cotter 522 14.70 23.10 32.55
Guide Wheel 523 33.60 40.95 52.50
Furl Link w/Cotter Pin 527 9.45 10.50 15.75
Furl Arms w/Cotter Pins (pair) 528 26.25 34.65 42.00
Furl Arms w/Cotter Pins (pair) Long 528-1/2 27.30 35.70 44.10
Furl Arms w/Cotter Pins (pair) X-Long 528-3/4 N/A 37.80 46.20
Helmet w/hardware 560 195.30 213.70 246.25
Nut for 588 565 5.25 5.25 5.25
Steel Washer for Table 576 2.10 3.15 5.25
Locknut for top of mast pipe 578 10.50 15.75 25.20
Lockwasher for top of mast pipe 579 4.20 5.25 7.35
Vane Spring Holder 580 10.50 14.70 17.85
Tailbone Casting 585 40.95 48.30 86.10
Stud for Pitman Guide 588 5.25 5.25 5.25
Pump Rod Yoke w/Cotter Pin 608 55.65 59.85 66.15
Furl Lever Complete - 4 Post 609S 101.85 126.00 178.50
Pin for 608 Yoke 610 6.30 7.35 9.45
Upper Furl Ring w/o Arms 613-1/2 86.10 92.40 106.05
Lower Furl Ring  4 Post Split 614S 40.95 44.10 66.15
Bolt w/Cotter Pin 622 6.30 7.35 9.45
Tailbone Assembly w/#510 639 140.20 180.10 289.80
Buffer Device - Complete 659 80.85 89.25 166.95
Pipe & Base Assembly 661-1/2 309.75 340.75 432.10
Pipe Base Only for 4 Post 674 71.40 71.40 94.50
Pitman Arm w/Garlock Insert 686 35.70 44.10 98.70
Brake Band 690 31.50 40.95 56.70
Hub & Shaft Assembly w/#729 and #744 703 373.80 390.60 492.45
Single Small Pinion Gear 704 56.70 65.10 107.10
Oil Socket for 520 on Model 702 711 8.40 9.45 11.55
Spout Washer 718 14.70 16.80 18.90
Shaft for 705 w/2 #721 pins 720 18.90 29.40 52.50
Pin for 720 Shaft 721 5.25 5.25 6.30
Pin for Hub Shaft 729 2.10 3.15 4.20
Wheel Arm w/nut and washer 736 33.90 42.30 50.95
Key for 704 small gears 744 6.30 7.35 9.45
Bearing Bar 751 14.70 22.05 25.20
Countersunk Plug 781 5.25 5.25 7.35
Brake Lever 786 35.70 43.05 63.00
Babbitt Bearing Between Small Gears FR708 32.55 46.20 84.00
Babbitt Long Sleeve Bearing for Hub FR730 50.40 73.50 124.95
Babbitt Bearing for Between Large Gears FR752 50.40 69.30 109.20
Large 2 Gear Assembly with Babbitt w/720 & 752 FR755 390.60 417.90 711.90
Small Button Key for 808 806 5.25 6.30 6.30
Garlock Bearing Between Small Gears 808 46.20 63.00 91.35
Garlock Long Sleeve Bearing for Hub 830 127.05 141.75 218.40
Garlock Bearing for Between Large Gears 852 56.70 84.00 113.40
Large 2 Gear Assembly with Garlock w/720 & 852 855 393.75 457.80 716.10
Motor Alignment Tool 960 68.25 78.75 89.25
         

Windmill Cylinder Cup Leather

         

Email us with your inquiry if you choose:
pumpsdbs@aol.com