PRESSURE TANK
FITTINGS KITS

Download Deluxe Fitting Kits in pdf

DEAN BENNETT SUPPLY CO
800-621-4291
Deluxe fitting kit is used to plumb a pressure tank for use with a pump system. These deluxe long cross tank fittings kits are designed for use with Air-E-Tainer bladder type pressure tanks, or other brand tanks where the discharge tapping is underneath the tank and inside the center of the skirt. Each kit contains a long tank cross, a boiler drain, 100 psi pressure gauge, a pressure switch, 1/4" x 4" brass nipple, and a check valve. We also offer a 100 psi pressure relief to protect against tank damage from over pressurizing.

1" LONG TANK FITTINGS KIT

$ 74.35 1" Deluxe long tank fittings kit contains a 1" long tank cross #709, a 100 psi pressure gauge, a 30-50 psi pressure switch, a 1/4" x 4" long brass nipple, a 1/2" boiler drain, and a 1" brass check valve.
$   8.50 1/2" pressure relief valve set at 100 psi

1-1/4" LONG TANK FITTINGS KIT

$ 102.05 1-1/4" Deluxe long tank fitting kit contains a 1-1/4" long tank cross #709, a 100 psi pressure gauge, a 30-50 psi pressure switch, a 1/4" x 4" long brass nipple, a 3/4" boiler drain, and a 1-1/4" brass check valve.
$   12.50 3/4" pressure relief valve set at 100 psi

1" SHORT TANK FITTINGS KIT

$ 67.35 1" Deluxe short tank fittings kit contains a 1" short tank cross #710, a 100 psi pressure gauge, a 30-50 psi pressure switch, a 1/4" x 4" long brass nipple, a 1/2" boiler drain, and a 1" brass check valve.
$   8.50 1/2" pressure relief valve set at 100 psi

1-1/4" SHORT TANK FITTINGS KIT

$ 80.30 1-1/4" Deluxe short tank fittings kit contains a 1-1/4" short tank cross #710, a 100 psi pressure gauge, a 30-50 psi pressure switch, a 1/4" x 4" long brass nipple, a 3/4" boiler drain, and a
1-1/4" brass check valve.
$ 12.50 3/4" pressure relief valve set at 100 psi

TANK CROSSES

Short tank tee used to connect to pressure tank where the connection is on the outside edge. The long tank tee is used to plumb a pressure tank where the connection is below the center of the tank.
#710 SHORT TANK CROSS #709 LONG TANK CROSS
$ 14.25
1" #710 short tank cross with all 3 points tapped 1" male and 3/4" female thread. Tank leg of tee is 3 1/4" long, the 2 front ports are 1/2", and the 2 top ports are 1/4"
$ 21.00
1" #709 long tank cross with all 3 points tapped 1" male and 3/4" female thread. Tank leg is 9 1/2" long, the 2 front ports are 1/2", and the 2 top ports are 1/4"
$ 19.35
1-1/4" #710 short tank cross with all 3 points tapped 1 1/4" male and 1" female. Tank leg is 3 1/4" long, the 2 front ports are 3/4", and the 2 top ports are 1/4"
$ 41.00
1-1/4" #709 long tank cross with all 3 points tapped 1 1/4" male and 1" female. Tank leg is 12 1/2" long, the front 2 ports are 3/4", and the 2 top ports are 1/4"

HOME                    AIR-E-TAINER TANKS

Download our catalog in pdf format

Prices effective April 1, 2008