CYLINDER REPAIR PARTS |
DEAN BENNETT SUPPLY |
|
|
|||
| $ 77.50 | 1-7/8" | 3-Leather Ball Valve Plunger Assembly for use with 5/8" Rod | |
| $ 97.75* | 1-7/8" | 4-Leather Ball Valve Plunger Assembly for use with 5/8" Rod | |
| $ 58.50 | 1-7/8" | Complete Ball Valve Bottom Check | |
| $ 106.50 | 2-1/4" | 3-Leather Ball Valve Plunger Assembly for use with 7/8" Rod | |
| $ 131.50* | 2-1/4" | 4-Leather Ball Valve Plunger Assembly for use with 7/8" Rod | |
| $ 82.00 | 2-1/4" | Complete Ball Valve Bottom Check | |
| $ 164.00 | 2-3/4" | 3-Leather Ball Valve Plunger Assembly for use with 7/8" Rod | |
| $ 194.00* | 2-3/4" | 4-Leather Ball Valve Plunger Assembly for use with 7/8" Rod | |
| $ 125.50 | 2-3/4" | Complete Ball Valve Bottom Check | |
| The
#449-B all brass open top style cylinder allows for both the plunger assembly
and the bottom check to be pulled for service without pulling the steel drop pipe. * These plunger assemblies have 4 leathers on the ball plunger for deeper settings. |
|||
|
|
|
| #449B PLUNGER | #449B BOTTOM CHECK | 442 & A-40 PLUNGER |
# 442 & #A-40 PLUNGER ASSEMBLIES |
| $ 52.00 | 2" | 2-Leather Complete Plunger Assembly for 7/16" Rod | |
| $ 56.00 | 2-1/4" | 2-Leather Complete Plunger Assembly for 7/16" Rod | |
| $ 60.75 | 2-1/2" | 2-Leather Complete Plunger Assembly for 7/16" Rod | |
| $ 71.00 | 3" | 2-Leather Complete Plunger Assembly for 7/16" Rod |
| The plunger assemblies listed above are for either #442 All Brass Flush Cap Cylinders or A-40 Cast Iron Brass Lined Cylinders. | |||
A-40 BRASS LINED CYLINDER BOTTOM CHECKS |
|||
| $ 47.50 | 2" | Bottom Check Assembly for Brass Lined Cylinder | |
| $ 49.50 | 2-1/4" | Bottom Check Assembly for Brass Lined Cylinder | |
| $ 55.25 | 2-1/2" | Bottom Check Assembly for Brass Lined Cylinder | |
| $ 56.50 | 3" | Bottom Check Assembly for Brass Lined Cylinder | |
|
|||
| $ 10.80 | 7/16" x 19" Rod | Stainless Steel Replacement Rod for Cylinder |
|
Prices effective 12/1/2005cylinders, and #A40 cast iron brass lined well cylinders.