COMMANDER PRO 100
COMPLETE PACKAGED

CONSTANT PRESSURE

SYSTEMS 
DESIGNED
FOR THE
PROFESSIONAL
PUMP INSTALLER

FEATURES:

Easy Installation

Increases flow as demand increases

Adjustable constant pressure

Built-in diagnostics

Automatic pump and motor

Smart Reset(R) Technology
Constant pressure pumps.
DEAN BENNETT SUPPLY
Ph 1-800-621-4291
Smart Phone Dialable

2 HP Constant Pressure Systems for home and irrigation applications. The F&W Commander Pro 100 combines reliability and state-of-the-art technology to provide private water system owners with constant pressure and more water on demand. The Commander Pro 100 provides constant pressure by continually adjusting the pump performance to meet water demand. This system also eliminates pressure cycling during long-running applications such as lawn sprinkling and geothermal heat pump operation. For a premium water system that covers a wide range of demand, look to the F&W Commander Pro 100 complete system.
Applications      
Residential Water Systems   Lawn Irrigation Systems
  "City-like" water pressure     Even distribution of water in zones
  Smaller tank saves space     Eliminates need for separate system
Geothermal Systems   Water Treatment Systems
  No need for large buried tanks     More efficient back flushing
  Eliminates pressure cycling     No need for multiple pumps
  GENERAL SPECIFICATIONS - Commander Pro 100 Series
Use 20 Amp for CP100 Input ( from power source ) Voltage
Frequency
Amps (RMS)
Power at
Power at
Power Factor		 200-250 V/Single Phase
60/50 Hertz
19 Amps
65 watts @ 30 Hz
3800 watts @ 80 Hz
1 Constant
Output ( to motor ) Voltage
Frequency
Amps (RMS)
Start		 Variable V/Three Phase
Variable 30-80 Hz
8.1 Amps
High Torque/Soft Start
25-80 PSI preset 50 psi
NEMA 1 (indoors)
  Built-in protection & diagnostics for

Short Circuit
  Surge Protection

Overheat Controller w/auto
  Underload - low water condition

compensation feature.
  Undervoltage  
  Locked pump w/auto reverse feature  
Wire Sizing  
Copper Wire Size 12* 10 8 6 4 3 2
Max. Length (Feet) 85 140 220 345 550 680 895
Copper Wire Size 14 12 10 8 6
Max. Length (Feet) 320 510 810 1280 2010
* Wire with 90 degree C insulation only.
Maximum wire lengths connecting the CP100 controller to the main
circuit box ( based on 3% voltage drop at 230V )		 Maximum wire lengths connecting the motor to the CP100 controller.
DO NOT USE AUMINUM WIRE Circuit should be a dedicated circuit with a 20 amp circuit breaker.
Franklin's CP Subdrive 100
Controller with advanced
electronics. Air Cooled
NEMA 1 enclosure. Adjusts
25 - 70 psi constant pressure.
Includes pressure sensor
switch.		 Factory specified pump end for optimal performance and efficiency. Specifically factory engineered to be compatible with Subdrive 100 Controller. 2 HP proven Franklin Super Stainless water-lubricated motor. Performance matched for long life. Specified to avoid overload. Small Air-E-Tainer(R) 14 Gal. capacity pressure tank saves space and money. Properly sized and pre-charged to 35 PSI or 70% of your desired pressure setting.
 

 

 

 

CP100-07  Pump System  $ 2185.00
CP100-07 constant pressure pump performance chart.

CP100-10  Pump System  $ 2155.00
CP100-10 constant pressure pump performance chart.

 

 

 


CP100-19  Pump System  $ 2150.00
CP100-19 constant pressure pump performance chart.

CP100-27  Pump System  $ 2130.00
CP100-27 constant pressure pump performance chart.

CP100-35  Pump System  $ 2315.00
CP100-35 constant pressure pump performance chart.

Manifold kit for plumbing pressure tank for constant pressure system.

All CP100 Series constant pressure pumps require our CPSMSS20KIT for $ 247.00 which includes the 2" Stainless Steel manifold, which protects against throttling your flow, and gives you the 1" leg back to the pressure tank. Kit includes a 1" adjustable pressure relief.

tank manifold for plumbing a CP100 series constant pressure pump.

Constant pressure pump system fitting kit for pressure tank #CPSM125100KIT   
$ 152.00
This can be used for systems up to 25 gpm flow.

Stainless Steel long tank tee fitting kit for constant pressure CP100 series.

All Stainless Steel Constant Pressure Tank Fitting Kit for CP 100 constant pressure pumps flows up to 25 gpm.   #CPSM125SSKIT     $ 170.50
 

HOME          Constant Pressure Pumps
Download CP100 Constant Pressure Pumps in pdf

Download our catalog in pdf format

Prices effective April 29, 2013